T
TRIAD / FIELD SAFETY
Interactive Job Safety Analysis · Version 43 (Development Test) · V33 paper layout
V43 EMAIL TEST · SAMPLE ONLY
Plant iPad pilot: Complete the form using fictional job details and signatures. The app does not save drafts to browser storage or download files. Use Submit & Email JSA at the end. Email delivery requires a configured server-side sender; until then, no paperwork is delivered.
TRIAD FIELD SAFETY · INTERACTIVE JSA

Job Safety Analysis

Select job scopes, review the hazards and controls, sign crew acknowledgments, and photograph HHC and inspection sheets. In this development build, the server prepares one combined PDF containing the JSA, HHC, inspections and attached photos. Sending uses a server-configured Gmail test recipient. Do not use real job records until the email service and site permissions are approved.

DEVELOPMENT REVIEW ONLY — NOT APPROVED FOR FIELD USE. Use fictional jobs and signatures until the server email connection is configured and approved. The embedded employee names are visible to anyone who can access this web page. The application does NOT write JSA drafts to browser local storage; closing or refreshing will discard unsent work. Crew names are available in each crew row. Employees manually enter their own ID numbers; no roster access code is needed. No private submission code is required. The test email button has a server rate limit but does not authenticate employees; use fictional information only. Production sending needs approved abuse protection. Email acceptance is not proof of OneDrive archiving. The local audit history is not identity verification or tamper-proof.

01 Job overview

Identify the task, location, supervisor, and active work authorization.

02 Job hazards & required PPE

Quick-selection checklist based on Form 042. Select hazards and PPE from Form 042. General hazards selected here appear as a separate task-wide safety review in Section 04, with editable suggested controls. Confirm the control suits the task and site requirements.

Hazards you check here populate Section 04 as an editable general-hazard row with a matching suggested corrective measure. The suggested controls are drafts requiring a worksite review; do not assume they meet all site permit or regulatory requirements. PPE must be checked against the permit and employer requirements.

03 Select job scopes & activities

Select a job scope to load its work sequence, then scroll directly into the job chart below to choose applicable hazards and review corrective measures. You can return here to add another scope without losing your work.

Important: Known hazards and controls are suggested from the Field Execution files, JSA Hazards and Controls document, and Triad Safety Execution Plan. Select only applicable entries. Site-specific PPE ratings, numeric limits, energized-work rules and permit requirements must be verified against current approved standards before use.

Tap any scope to add its work sequence. You can select several scopes and remove one without resetting the others.

Next: Review the loaded work sequence and pick the hazards that apply. Your corrective measures appear automatically as green cards.

↓ Review job steps and select hazards

04 Sequence of Job Steps, Identified Hazards & Plan of Action

Selecting a job scope automatically inserts its work sequence. Edit or add steps in the first column, choose only applicable hazards in the second, and see the matching corrective measures as readable green cards in the third. Form 042 remains a site checklist, not a job step.

● LIVE THREE-COLUMN JSA

BODY POSITION / LIFTING: Always use good body positioning and proper lifting techniques. Obtain additional help or mechanical assistance for heavy or awkward loads.

WALKING / WORKING SURFACES: Check footing, curbs, congestion, equipment access and egress. Use the safest route to the work area and take care when stepping out of vehicles or equipment.

Sequence of Basic Job Steps / PlanningIdentified Potential Hazard with Each StepPlan of Action to Control / Eliminate Hazards

05 Pre-job critical checks

Complete the site-specific Form 042 fields below, alongside HHC screening and any scope-specific critical checks. Unchecked boxes are not evidence that a control was verified.

High Hazard Checklist (HHC) screening *REQUIRED · ALL JOBS

Is a High Hazard Checklist (HHC) required for this job under current site rules?

Complete the HHC using the applicable site process, then take pictures of each completed HHC page below. The pictures are included with this JSA's printable PDF and portable JSON backup. Approval questions document site requirements; this prototype does not grant approval.

Equipment inspection sheet photosTAKE OR UPLOAD PHOTOS

Photograph each completed inspection sheet for forklifts, manlifts, scissor lifts, and other equipment used during the shift. Add as many relevant pages as needed and identify the equipment.

Stop-work expectation: An unresolved permit, energy-control, fall-protection, lifting, atmospheric, or other critical issue is not resolved by this form. Stop, escalate, and follow the site permit and authorization process.

06 Crew acknowledgment

Each employee enters their employment number and signs on before starting, then signs off after completing work. A drawn signature and local timestamp are saved for both actions. The employee number is entered again at signing to confirm it matches the crew entry; this prototype cannot verify employment identity.

BY SIGNING THIS JSA YOU AGREE TO WORK SAFELY AT ALL TIMES; THAT YOU ARE AWARE OF ALL HAZARDS THAT EXIST AND HAVE MADE CORRECTIVE MEASURES FOR THE HAZARDS AND HAVE PARTICIPATED IN THIS JSA.

Select each employee’s name in Crew Acknowledgment. Employee numbers are never prefilled; employees enter their own number before signing. Use Not listed — type name for other workers.

Foreman / Supervisor — Start-of-Work Sign-Off

Before work starts, the responsible foreman or supervisor signs here to acknowledge review of the work sequence, hazards, controls and crew briefing. This is separate from the in-progress field audit and the end-of-job closeout.

This development prototype records a drawn supervisor signature and timestamp without requiring a crew employee-number match; it does not independently verify identity or issue a permit. Changes to the work plan require renewed crew acknowledgment but do not require a new foreman/supervisor approval in this app.

In-progress Safety / Supervisor / Foreman Field Audit

Record an actual job-site audit during work. The audit time is captured when you click Record field audit, and each follow-up creates a separate historical record.

 

Local prototype record only. The time and employee number are not independently verified. In production, An approved backend must authenticate auditors and preserve a tamper-resistant audit history.

07 Job closeout

Document the condition of the work area and crew checkout at the end of the task. These entries do not replace permit closeout or return-to-service authorization.

Employee completion signatures / time out

By signing below you acknowledge that you know of no pending safety issues and that you have reported ANY and ALL incidents or injuries that occurred to yourself or co-workers to your supervisor, foreman or safety representative.

Foreman closeout

Use this area to record job closeout. Follow site procedures for any unresolved conditions.

Daily closeout & file handoff

For testing, press Submit & Email JSA. When the sender is configured, the server creates one dated PDF including the JSA, HHC, inspection records and photos. Delivery acceptance does not confirm OneDrive archiving. No file download is needed on the iPad.

TEST VERSION — readiness checklist displays and submission gates are temporarily removed. Review them before final release. Send only fictional sample records until site policies and the sender are approved.

08 Optional review & export

Review the recorded work and audit history, then save or export the test record. Required site approvals and permits remain separate. Test mode does not validate completion.

Review record

JSA change history / audit log

Local, timestamped prototype history for scope changes, hazard choices, field edits, signing and closeout. Earlier crew acknowledgment timestamps are logged when revisions require renewed signatures; their former signature images are not retained in this prototype. It is stored with the JSON draft and included in print, but can be altered or cleared on a device; A secure server must provide a tamper-resistant production audit trail.

Interactive JSA Version 43 development preview (Version 33 design retained). Signatures and timestamps are locally recorded; identities are not verified. Uploaded photo pages follow this record. This does not issue permits or approvals.